The idea being that when users are hardwired in, then they will be on the local LAN and have access to internal resources. 88% Upvoted. GlobalProtect Portals - Agent Config Internal Host Detection Configure "Internal Host Detection" under "Network> GlobalProtect> Portals> Agent> Internal". If the External Portal is not reachable, it will wait for 180 seconds (3 min) and then use the previous cached . On a new HP tablet it's taking about 10 minutes before the agent realizes it's on the internal network. Configure a DNS PTR record on the internal DNS server for the IP/Hostname configured under " Internal host detection ". Configure an internal gateway Configure Internal Host Detection on your external gateway (see picture below) without specifying and internal gateway. Most Common DNS Query Responses for Internal Host Detection Run below command from the affected machine to check if the reverse DNS lookup returns the hostname that matches the hostname configured under Internal tab of GlobalProtect portal agent configuration ping -a <IP-address> The specified IP address does not have to be reachable internally. The GlobalProtect Portals Agent Config Internal. 3. GlobalProtect Agent Config Internal Host Detection | Palo Alto Networks When using Internal Detection and user starts up his workstation while connected internally (In the LAN), the agent first tries to reach the EXTERNAL portal to check for new configuration. Configure Services for Global and Virtual Systems Global Services Settings IPv4 and IPv6 Support for Service Route Configuration Destination Service Route Device > Setup > Interfaces Device > Setup > Telemetry Device > Setup > Content-ID Device > Setup > WildFire Device > Setup > Session Session Settings Session Timeouts TCP Settings Internal Host Detection in GlobalProtect - Palo Alto Networks GlobalProtect Internal Host Detection Behavior Question Palo Alto Networks Design Details 15 Prisma Access Location Selection When configured for an always-on connection method, the GlobalProtect app can use internal host detection to determine whether the network currently connected is external or internal to the organization. How to configure internal host detection without an internal gateway Their GlobalProtect client will connect into an internal gateway due to the Internal Host Detection, only for the purposes of sending HIP data. Always On internal Host detection : paloaltonetworks - reddit Configure a DNS PTR record on the internal DNS server for the IP/Hostname configured under "Internal host detection". How to configure internal host detection without an internal gateway Commit the changes Additional Information. GlobalProtect Portals Agent Internal Tab - Palo Alto Networks GP Debug( 102): connect failed with 180 seconds timeout. Internal Detection Select App . connection to internal gateway not working due to connection-type On the internal firewall, as authentication was successful, user-id is correctly informed of my username/ip address in his database, but it will keep it until a timeout is reached (defaut is 45min). If SSO is selected, Internal Host Detection with be used (by reserve DNS lookup, resolve IP to hostname) 2. GlobalProtect Internal Host Detection taking 10+ minutes. We recently created a new Portal and gateway to test out Always On VPN and it's working. GlobalProtect Internal Host Detection taking 10+ minutes [SOLVED] GlobalProtect (PAN) disable for internal networks 1 comment. Select the portal configuration to which you are adding the agent configuration, and then select the Agent tab and select the desired agent configuration. Ensure that the internal host detection is configured through the portal. Always On internal Host detection Global Protect So I've been trying to figure out this odd quirk for a few days now. This wireless network will have no connectivity to internal security zones. The issue is when a client is on the Internal network it's won't detect that it is on the Internal network. The GlobalProtect Portals Agent Config Internal Host Detection best practice check ensures that an internal host detection is being utilized. Using internal host detection enables the GlobalProtect app to determine if an endpoint is inside the enterprise (internal) network. Enable advanced internal host detection. Select Network GlobalProtect Portals . Without internal host detection, the app tries to connect to the internal gateway(s) first and then moves to Prisma Access . Is this possible to allow connection-type=notunnel, and keeping the ssl session opened to have a sort of keepalive ? Advanced Internal Host Detection - docs.paloaltonetworks.com When the user connects to globalprotect, the client will perform a network discovery. Commit the changes Additional Information Two types of globalprotect gateways exist internal GlobalProtect app fails to detect Internal Network with Internal Host Using internal host detection enables the GlobalProtect app to determine if an endpoint is inside the enterprise (internal) network. This will cause the agent to search for the host which will tell it if it's on and internal network, and if it is then it just won't do anything as there is no internal gateway defined. GlobalProtect Internal host detection PanOS Procedure Configure "Internal Host Detection" under " Network> GlobalProtect> Portals> Agent> Internal ". From support team: " The statement in GP troubleshooting guide looks incorrect. GP client (start from 1.1.4) will always set its network type to 'External' and connect to external gateway. Has anyone run into an issue with the Internal Host Detection on the 4.0.3 GlobalProtect Agent taking forever? If On Demand mode is selected.