The FetHead offers a fixed 27dB of gain when plugged inline. Additionally I just setup a small studio with 5 SM7B's via a Focusrite Clarett 8Pre without a CL and it too requires the pre amps to be turned up to maximum . I would suggest a FetHead with the UMC204HD to save a few $$$ and a good number of other decent cardioid dynamic mics can perform as well as the SM7b for less money. For this reason, choosing the right mic is essential as it helps ensure better audio quality. More generally, a device like this is called an inline preamp and there are actually . I have a CLoudLifter and Fethead and Fethead Phantom. At a minuscule 2 x 2 x 7.5 cm and weighing in at 0.175 lb, this device manages to pack a big boost in a tiny product. This device has the ability to add up to 25dB of gain without marring the signal of your audio. It's a plug 'n play unit with an inline format to boost the gain of non-phantom-powered microphones. TRITON AUDIO FetHead in-Line Microphone Preamp Review. I will have one tomorrow to test. I don't recommend it, I ended up getting more noise than I was comfortable with. While the circuity doesn't account for the microphone like the Cloudlifter, the FetHead makes up for this in its absolutely tiny footprint. Cloud Microphones Cloudlifter CL-1DTM/DAWCloud Microphones Cloudlifter CL-1 Mic ActivatorDTM/DAWCloud Microphone Cloudlifter CL-1DTM/DAWCloud Microphones Cloudlifter Cl-1 ab 160/>DTM/DAW 2022/10/11 2022/10/10 Intro. Cloudlifter noise: -88db at 5k hz. Cloud Microphones' Cloudlifter is a revolutionary product that allows you to unlock the true potential of your mic signal. In today's video we breakdown and review t. . 2:52 . It is placed between a low-output dynamic, ribbon, or tube microphone and the mixing console to add 20-25dB of clean, transparent gain. I run my SM7B through a Fethead and into the Scarlett Solo 2nd Generation. The musicians need to be extremely particular about the audio experience because the audience won't bear the distortion and extra-loud music. A mic helps with recording and makes sure that the background noise is eliminated, leading to clear sound output but it needs a mic . Videos for related products. Very happy with the sound quality. Here's the bottom line: Fethead Noise: -79 db at 5 k hz. Cloudlifter: Flat response, down -3 db at 50 k hz. I will say that the fethead-style clone sits loosely in my SM7b so I just use it like you would a cloudlifter. I've never used a Cloudlifter though I've heard they're good too. The Best Mic Activators & Cloudlifter Alternatives. I will also point out that the Simply SOund SS1 is in the pinned deal page and on sale for $30. 1. Earl Hall . Oh okay. Is the Fethead worth it for the SM7B? Its claim to fame is its simplicity, small footprint, and modest price tag. The cloudlifter is built very solidly, but I don't like the fact that it's a standalone box. marmalade cream said: I haven't used the Dynamite with the SM7b but I have used the Triton Fethead, which is a similar cylinder design. Triton Audio FetHead (Best Value) After the CL-1, Triton Audio's FetHead is undoubtedly the most popular low-noise, in-line preamp for dynamic and ribbon mics. This can be especially helpful if you are using a microphone with low sensitivity, like the Shure SM7B. I prefer it to the Cloudlifter because it requires one less cable and it's one less box I have to worry about. THD: Fethead .5% at -30 db input, .2% at -35 dbu input levels. Includes: Shure SM7B Microphone + Cloud CL-1 Cloudlifter + Extra XLR Cable + The imaging World MicroFiber Cloth ; Use SM7B For Professional Voice-Over Applications - Flat, Wide-Range Frequency Response - Air Suspension Shock Isolation . Fethead vs Cloudlifter. A Cloudlifter is a microphone booster or activator made by Cloud Microphones. Frequency response: Fethead response not flat, up 3 db from 20 hz to 500 hz, down -3 db at 40 k hz. I'm not hurting for XLR cables and outside of sitting somewhat loose, it works perfectly fine. Cloudlifters solve one of the biggest problems of low-signal mics in a simple, easy-to-use activator. A Cloudlifter is a device that helps boost the signal from your microphone by adding 25 dB of gain before the signal even reaches your microphone preamp. Or should you get the Cloudlifter for your SM7B? In this video I explain in which situations you might need a Cloudlifter or FetHead.Amazon | TRITONAUDIO FetHead: https://amzn.to/30h8Hib *Amazon | Cloud Mic. I cannot tell a difference between the SS-1 and the Cloudlifter CL-1. A dynamic mic with a neodymium magnet will generally have a high enough output for an interface without adding a Cloudlifter or FetHead (Sennheiser e935 2.8mv/PA vs SM7b 1.12mv/PA) So does SM7B need a preamp? Thanks for the input!